Kit Contents; Observe Warnings And Cautions - HP Xw460c - ProLiant - Blade Workstation Installation Instructions Manual

Kit contents

●
NVIDIA Quadro FX 1600M graphics card
●
Regulatory Compliance Notices
●
Warranty
● Material declaration for China
●
Installation instructions (this document).
NOTE: This kit does not contain a graphics driver CD-ROM. The graphics driver is downloaded
from http://www.hp.com

Observe warnings and cautions

WARNING!
presence of a hot surface or hot component. If this surface is contacted, the potential for injury exists.
To reduce the risk of injury from a hot component, allow the surface to cool before touching.
WARNING!
presence of an electrical shock hazard. To reduce the risk of injury from electrical shock, do not open
any enclosed area.
WARNING!
— Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
— Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.
— Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
WARNING!
workstation, setup, posture, and health and work habits for computer users, and provides important
electrical and mechanical safety information. This guide is located on the Web at
ergo and/or on the documentation CD if one is included with the product.
CAUTION:
beginning these procedures, be sure you are discharged of static electricity by briefly touching a
grounded metal object.
CAUTION:
precautions while performing the system parts removal/replacement procedures:
— Work on a static-free mat.
— Wear a static strap to ensure that any accumulated electrostatic charge is discharged from your body
to the ground.
— Create a common ground for the equipment you are working on by connecting the static-free mat,
static strap and peripheral units to that piece of equipment.
2 NVIDIA Quadro FX 1600M installation instructions
as described in Step 1 below.
Any surface or area of the equipment marked with these symbols indicates the
Any surface or area of the equipment marked with these symbols indicates the
To reduce the risk of electric shock or damage to your equipment:
To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper
Static electricity can damage the electronic components of the workstation. Before
To prevent damage to this system, observe the following Electro Static Discharge (ESD)
http://www.hp.com/
ENWW