2
Setting up the Hardware
This chapter provides information on setting up of the workstation hardware.
Quick setup
WARNING!
— Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
— Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.
NOTE:
Your workstation might not have PS/2 mouse and keyboard connectors as shown in Figure
2–1. Alternatively, connect the mouse and keyboard to appropriate USB connectors (see Table 2–2).
Figure 2-1
Workstation quick setup example
NOTE:
After setting up your workstation hardware, connect other peripheral components (such as a
printer) according to the instructions included with the device. For more information on your HP
Workstation, visit http://www.hp.com/go/workstationsupport.
ENWW
To reduce the risk of electric shock or damage to your equipment:
Quick setup
7