Controlling The Network Security Features - HP Vectra XA 6/xxx User Manual

3 Troubleshooting Your PC
Configuring Your Network Connection

Controlling the Network Security Features

The Security Features allow you to enable starting from the network if
you want the PC to start from a LAN server.
To enable starting from the network:
1 Use the or
"Security Menu Items", in the HP Setup program).
2 Press to highlight the line
to select the submenu.
3 Highlight the line
select the remote start protocol:
NOVELL/ETHERNET/RIPL
MICROSOFT/ETHERNET/RIPL
4 You can disable the other boot options to prevent the PC from
booting if the network or server ever fails:
a Press to go to the
or to change the option to
b Press to go to the
to change the option to
c Press to go to the
or to change the option to
58 English
key to select the
Security
Start-Up Center
Start from Network
for Novell
for LAN Manager
Start From Flexible Disk
Start From CD-ROM
[Disabled]
Start From Hard Disk
[Disabled]
menu (refer to
and press
and press or
line. Press
.
[Disabled]
line. Press
.
line. Press
.
to
or