HP Presario CQ45-100 - Notebook PC Manual page 10

10. Use the media tray frame to remove the optical drive (3).
11. If it is necessary to replace the optical drive bracket, position the optical drive with the optical drive
bracket toward you.
12. Remove the two Phillips PM2.0×3.0 screws (1) that secure the optical drive bracket to the optical
drive.
13. Remove the optical drive bracket (2).
14. Position the computer with the front toward you.
15. Disconnect the two WLAN antenna cables (1) from the WLAN module.
16. Remove the two Phillips PM2.0×3.0 screws (2) that secure the WLAN module to the computer.
(The edge of the module opposite the slot rises away from the computer.)
6 Chapter 1 Removal and replacement procedures ENWW