Applications
Additional resources
3-10
Once you have the port number and protocol, add an exception for
that port.
To add a port exception:
1. Open Windows Firewall and click the Exceptions tab.
2. Click Add Port to display the Add a Port dialog box.
a. Type the Port Number.
b. Choose TCP or UDP protocol.
c. Give the port exception a descriptive name in the Name field.
3. Click Change Scope to view or set the scope for the port
exception, and then click OK.
4. Click OK to close the Add a Port dialog box.
5. Click to enable the port.
Refer to the following resources for additional Microsoft Windows
Service Pack 2 and Microsoft Windows Firewall information:
TechNet Windows XP Professional Web site:
http://www.microsoft.com/technet/prodtechnol/winxppro/default
.mspx
Manually Configuring Windows Firewall in Windows XP
Service Pack 2:
http://www.microsoft.com/technet/community/columns/cableguy
/cg0204.mspx
Using the Windows Firewall INF File in Microsoft Windows XP
Service Pack 2:
http://www.microsoft.com/downloads/details.aspx?FamilyID=cb
307a1d-2f97-4e63-a581-bf25685b4c43&displaylang=en
Deploying Windows Firewall Settings for Microsoft Windows XP
with Service Pack 2:
http://www.microsoft.com/downloads/details.aspx?familyid=445
4e0e1-61fa-447a-bdcd-499f73a637d1&displaylang=en
www.hp.com
Quick Reference Guide