Scsi Interface Commands Supported - Seagate ST39204LC - Cheetah 9.2 GB Hard Drive Product Manual

46
Notes.
Extended messages (see the SCSI Interface Product Manual, part number 75789509).
[1]
[2] Supports all options except qas_req and iu_req.
9.3

SCSI interface commands supported

Table 6 following lists the SCSI interface commands that are supported by the drive. Cheetah 18XL Family
drives can be changed back and forth between SCSI-1, SCSI-2, and SCSI-3 (Ultra160) modes using the
Change Definition Command. OEM standard drives are shipped set to operate in Ultra160 mode.
Table 6: Commands supported by Cheetah 18XL family drive
Command name
Change definition
Compare
Copy
Copy and verify
Format unit [1]
DPRY bit supported
DCRT bit supported
STPF bit supported
IP bit supported
DSP bit supported
IMMED bit supported
VS (vendor specific)
Inquiry
Date code page (C1h)
Firmware numbers page (C0h)
Implemented operating def page (81h)
Jumper settings page (C2h)
Supported Vital product data page (00h)
Unit serial number page (80h)
Lock-unlock cache
Log select
PCR bit
DU bit
DS bit
TSD bit
ETC bit
TMC bit
LP bit
Log sense
Application client log page (0Fh)
Cache statistics page (37h)
Factory log page (3Eh)
Non-medium error page (06h)
Pages supported list (00h)
Read error counter page (03h)
Self-test results page (10h)
Start-stop cycle counter page (0Eh)
Temperature page (0Dh)
Verify error counter page (05h)
Write error counter page (02h)
Cheetah 18XL Product Manual, Rev. G
Command Supported by
code SCSI-2/3
40h N
39h N
18h N
3Ah N
04h Y
N
Y
Y
Y
Y
Y
N
12h Y
Y
Y
Y
Y
Y
Y
36h N
4Ch Y
Y
N
Y
Y
N
N
N
4Dh Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y