Samsung UN46C6400 User Manual page 30

Advanced Features
5. If the Security/PIN pop-up appears, go to Step 6. If the
Network Connecting Screen appears, go to Step 10.
6. Press the or button to select Security or PIN. For
most home networks, you would select Security (for
Security Key). The Security Screen appears.
1HWZRUN 6HWXS
6HFXULW\ .H\
A B C D E F
H I J K L M
O P Q R S T
V W X Y Z
4 0RYH ==(QWHU =$=5HWXUQ
7. On the Security screen, enter your network's Pass
Phrase.
✎
You should be able to find the Pass Phrase on
one of the set up screens you used to set up your
router or modem.
8. To enter the Pass Phrase, follow these general
directions:
– Press the number buttons on your remote to enter
numbers.
– Use the direction buttons on your remote to move
from button to button on the Security Key screen.
– Press the Red button to change case or display
symbols/characters.
– To a enter letter or symbol, move to the letter or
symbol, and then press the ENTER button.
– To delete the last letter or number you entered, press
the Green button on your remote.
9. When done, press the Blue button on your remote. The
Network Connecting screen appears.
10. Wait until the connection confirmation message is
displayed, and then press the ENTER button. The
Network Setup screen re-appears.
11. To test the connection, press the
select Network Test, and then press the ENTER
button.

English
Network Setup (Ad-Hoc)
You can connect to a mobile device without an access point
through the "Samsung Wireless LAN Adapter" by using a
peer to peer network.
✎
How to connect to new Ad-hoc device
1. Follow Steps 1 through 6 in the "How to set up using
 HQWHUHG
1XPEHU
0~9
G
2. Choose Select a network. A list of devices/networks
N /RZHU FDVH
U 'HOHWH
3. While in the device list, press the Blue button on the
6SDFH
4. Input the generated Network Name (SSID) and
How to connect an existing Ad-hoc device
1. Follow Steps 1 through 6 in the "How to set up using
2. Choose Select a network. The Device/Network list
3. Select the device you want in the Device list.
4. If security key is required, input the security key.
RETURN button to
This function is available when SWL(Samsung
Wireless Link) is set to Off.
PBC (WPS)" (p. 29).
appears.
remote.
✎
The message The existing network system
may have limited functionality. Do you want to
change the network connection? is displayed.
Security Key into the device you want to connect.
PBC (WPS)" (p. 32).
appears.
✎
If network doesn't operate normally, check
the Network Name (SSID) and Security Key
again. An incorrect Security Key may cause a
malfunction.