HP Rp3440-4 - 9000 - 0 MB RAM Installation Manual page 83

Installation guide, seventh edition - hp 9000 rp3410 and hp 9000 rp3440
Hide thumbs Also See for Rp3440-4 - 9000 - 0 MB RAM:
Table of Contents

Advertisement

To shut down the HP-UX operating system, see "Shutting Down HP-UX" on page 83.
Standard HP-UX Booting Using Boot Console Handler
To the autoboot function is enabled, the server boots to the installed operating system. If autoboot is not
enabled, the server enters the boot console handler (BCH). The BCH enables you to control the server's
booting environment.
To set the boot path if HP-UX is at a path other than the primary path, follow these steps:
To boot HP-UX, follow these steps:
Step 1. At the BCH
Step 2. From the
COnfiguration Menu
Step 3. From the
COnfiguration Menu
To boot HP-UX once you have set the primary path, follow these steps:
Step 1. At the BCH
Do you wish to stop at the ISL prompt prior to booting (y/n)?
Step 2. Enter n.
NOTE
If the server fails to boot, you may be required to boot from a DVD that contains the operating
system and other necessary software.
Booting HP-UX in Single-User Mode
To boot to HP-UX in single-user mode, follow these steps:
Step 1. At the BCH
Interact with IPL (Y, N, or Cancel)?>
Step 2. To interact with IPL, answer y.
Step 3. At the
prompt, type hpux-is.
ISL>
Booting HP-UX in LVM Maintenance Mode
To boot to HP-UX in LVM maintenance mode, follow these steps:
Step 1. At the BCH
Interact with IPL (Y, N, or Cancel)?>
Step 2. To interact with IPL, answer y.
Step 3. At the
prompt, type hpux-lm.
ISL>
Shutting Down HP-UX
To shut down HP-UX running on a server, use the shutdown command. You have the following options when
shutting down HP-UX:
To shut down and reboot an HP-UX system, use the shutdown -r command.
To shut down and halt (power off) an HP-UX system, use the shutdown -h command.
Chapter 1
, enter Menu> co.
Main Menu
> prompt, enter pa pri xx/xx/xx.
> prompt, enter ma.
, enter Menu> bo pri. The following prompt displays:
Main Menu
, enter command or menu> bo pri. The following message displays:
Main Menu
, enter command or menu> bo pri. The following message displays:
Main Menu
Installing the System
Booting the Operating System
83

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rp3410Rp34409000 rp34109000 rp3440

Table of Contents