Compaq Pro 6305 Hardware Reference Manual page 29

Microtower business pc small form factor business pc

Hide thumbs Also See for Pro 6305:

Table of Contents

Before installing an expansion card, remove the expansion slot cover or the existing expansion

card.

NOTE:

Before removing an installed expansion card, disconnect any cables that may be

attached to the expansion card.

If you are installing an expansion card in a vacant socket, remove the appropriate

expansion slot cover on the back of the chassis. Pull the slot cover straight up then away

from the inside of the chassis.

Figure 2-10

Removing an Expansion Slot Cover

Removing or Installing an Expansion Card

Table of Contents