Step2. Upgrade the firmware version 1008.0
1. If you completed Step 1 from above, remove the File and Folder (listed
below) on your USB drive.
File
: L530 firmware 1007.0.exe
Folder : T-PRLAUS
2. Save the firmware file onto your computer.
File : L530 firmware 1008.0.exe
4. Go to the USB Memory Drive and then double click the file
L530 firmware 1008.0.exe.
5. Press "Unzip" button.
7. After completing, press
"OK" and "Close" button.
3. Connect the USB Memory Drive
to the USB port of your PC.
Copy the file into the USB Memory Drive.
6. Unzipping is in progress.
8. The USB driver should contain one folder
named 'T-PRLAUS'
9. Safely disconnect the USB memory drive
by right clicking the green check mark
on the taskbar and then left click
"Safely Remove".
6