Setup Menu; Selecting The Sound Mode - Samsung UA46C5000 User Manual

Basic Features
Speaker Select (External Speaker /
TV Speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
✎
When Speaker Select is set to External Speaker, the
volume and buttons will not operate and the
MUTE
sound settings will be limited.
✎
When Speaker Select is set to External Speaker.
x
TV Speaker: Off, External Speaker: On
✎
When Speaker Select is set to TV Speaker.
x
TV Speaker: On, External Speaker: On
✎
If there is no video signal, both speakers will be mute.
SPDIF Output
SPDIF (Sony Philips Digital InterFace) is used to provide
digital sound, reducing interference going to speakers and
various digital devices such as a DVD player.
■ Audio Format: During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
✎
By connecting to 5.1ch speakers in a Dolby
Digital setup, maximize your interactive 3D sound
experience.
■ Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
Sound Reset (OK / Cancel)
Reset all sound settings to the factory defaults.

Selecting the Sound Mode

¦
When you set to Dual f-g, the current
sound mode is displayed on the screen.
Audio
Type
Mono
A2
Stereo
Stereo
Dual
Mono
Stereo
NICAM
Stereo
Dual
16
English
Default
Dual f-g
Mono
Automatic
change
Stereo  Mono
Dual f  Dual g Dual f
Mono
Automatic
change
Mono  Stereo
Mono  Dual f
Dual f
 Dual g 
✎
If the stereo signal is weak and an automatic switching
occurs, then switch to the mono.
✎
Only activated in stereo sound signal.
✎
Only available when the Input source is set to TV.
Setting the Time
¦
Time
■ Clock: Setting the clock is for using various timer
features of the TV.
O
The current time will appear every time you press
the
✎
If you disconnect the power cord, you have to set
the clock again.
✎
You can set the Day, Month, Year, Hour and
Minute directly by pressing the number buttons
on the remote control.
Using the Sleep Timer
¦
■ Sleep Timer: Automatically shuts down the
TV after a preset period of time. (Off, 30,
60, 90, 120, 150 and 180 minutes).
✎
To cancel Sleep Timer, select Off.
Setting the On / Off Timer
¦
■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
On Time
▲
Inactivate
▼
DUAL
Off Time
Inactivate
Volume
10
Repeat
Once
On Time / Off Time: Set the hour, minute, and activate
/ inactivate. (To activate timer with the setting you've
chosen, set to Activate.)
Volume: Set the desired volume level.

Setup Menu

INFO button.
Timer 1
00
00
Source Channel
TV 1
Sun Mon Tue Wed
L Move U Adjust E Enter R Return
SLEEP
00
00
Thu Fri Sat