Adjusting The Quality Of The External Display - Toshiba R10 S4401 - Tecra - Core 2 Duo 2.26 GHz User Manual

72
Getting Started
Using external display devices
2 While holding down
you want takes effect. Briefly pause each time you press the
key to allow time for the display to change.
This hot key cycles through the settings in the following order
(the last two options are available if an external monitor is
connected):
❖
❖
❖
❖
❖
(Sample Image) Display options window
3 Release the

Adjusting the quality of the external display

To obtain the best picture quality from your television (or other
video display device), you may need to adjust the video settings.
See the video device documentation for additional configuration
steps.
LCD—Internal display only
LCD + CRT—Internal display and external monitor
simultaneously
CRT—External monitor only
LCD + CRT Multi Monitor—Internal display and external
monitor, with one acting as the primary display and the
other as an extended desktop
Swap—Switch primary display between internal display
and external monitor when using extended desktop
key.
Fn
Fn , press F5 repeatedly until the setting
F5