Connecting A Multi-Channel Speaker System To Your Pc - HP Presario S7000 - Desktop PC User Manual

42
user's guide
The two ways to use the Volume icon are:
1 Click the Volume icon on the taskbar.
2 Adjust the volume.
3 When you are satisfied with the sound level, click outside the Volume
window to close this window.
Or
1 Double-click the Volume icon on the taskbar. The Volume Control settings
window opens.
2 Adjust the volume.
3 When you are satisfied with the sound level, click the Close box (the X in the
corner) to close this window.
connecting a multi-channel speaker system to
your pc
Multi-channel audio speakers plug into the Audio In, Audio Out, and Mic
connectors on the back or front of the PC. Refer to "pc back" on page 5, or "pc
front" on page 7 for the location of the connectors.
1 Turn off the PC and the speakers.
2 Connect the three audio cable plugs from the speaker system to the
connectors on the back of the PC. (See the following table.)
3 Turn on the PC.
4 Turn on the speaker system.
Connect speaker plugs for:
4/4.1
2 Speaker Speaker
Mode Mode
Front speakers Front speakers
Not used for Rear speakers
speakers
Not used for Not used for
speakers speakers
Configure the audio output for the multi-channel speaker system by performing
the following procedure.
To PC
connector
6/5.1
Speaker
Mode
Front speakers Audio Out
(lime-green)
Rear speakers Audio In (blue)
Centre/ Mic-1 (pink)
subwoofer
speakers
Connector
icon
OUT
IN