Temperature Control; Remote Control Sensor - LG LW1513ER Owner's Manual

Dry - Dry mode is used to remove humidity from the room without additional cooling.
Once the set temperature is reached the compressor and circulation fan turns off.
Fan speed is pre-set and cannot be adjusted.

TEMPERATURE CONTROL

The thermostat monitors room temperature to maintain the desired temperature.
The thermostat can be set between 60 F~86 F (16 C~30 C).

REMOTE CONTROL SENSOR

During operation in failure of electric power, the unit runs as previous setting operation.
CAUTION
The remote controller will not function properly if strong light strikes the sensor of the air
conditioner or if there are obstacles between the remote controller and the air conditioner.
1. Push out the cover on the back of the remote control with your thumb.
2. Pay attention to polarity and insert one new AAA 1.5V batteries.
3. Reattach the cover.
Do not use rechargeable battery. Make sure that the batteries is new.
Do not mix alkaline, standard (Carbon-zinc) or rechargeable (Nickel-cadmium)
batteries.
- In order to prevent discharge, remove the batteries from the remote control if
the air conditioner is not going to be used for an extended period of time.
Keep the remote control away from extremely hot or humid places.
To maintain optimal operation of the remote control, the remote sensor should
not be exposed to direct sunlight.