Replacing The Keyboard And Mouse - Lenovo IdeaCentre Q100 Hardware Maintenance Manual

Replacing the Keyboard and Mouse

9. Pull the motherboard out of the chassis.
10. Place the new motherboard into the chassis, aligning the screw holes
in the motherboard with the mounting holes in the chassis.
11. Screw the two screws on the new motherboard back in.
12. Install all related components back to the new motherboard.
13. Install the computer cover. Refer to "Completing the installation".
To replace the keyboard and mouse:
1. Before removing any media (diskettes, CDs, or memory cards) from
the drives, shut down your operating system, and turn off all attached
devices and the computer.
2. Unplug all power cables from electrical outlets.
3. Locate the ports for the keyboard and mouse. Refer to "Front view of
the computer" and "Rear view of the computer".
Chapter 7. Replacing hardware
37