Setting The Clock - Panasonic DMCFP1 - DIGITAL STILL CAMERA Operating Instructions Manual

Setting the clock

Do not touch the
lens.
Lens cover
■
To set local time at travel
destination
[WORLD TIME] (→52)
12
VQT2M98
Open the lens cover
The power is turned on.
If the language select screen is not displayed,
proceed to step .
Press [MENU/SET] while the
message is displayed
Press ▲▼ to select the language,
and press [MENU/SET]
• The [PLEASE SET THE CLOCK] message
appears.
Press [MENU/SET]
The clock is not set when the camera is shipped.
Press ◄► to select the items (year, month, day, hour, minute,
display order or time display format), and press ▲▼ to set
Select the
setting
item
Change
Select the display order for the day, month, and year
the values
([M/D/Y], [D/M/Y], or [Y/M/D]).
and
settings
• To cancel → Press .
• When set to [AM/PM], 0:00 midnight is AM 12:00, and 0:00 noon is PM 12:00.
Press [MENU/SET]
Confirm the setting and press [MENU/SET]
• To return to the previous screen, press .
• Turn on power again and check time display.
(Time and date can be displayed by pressing [DISPLAY] several times.)
To change time setting
Select [CLOCK SET] from [SETUP] menu (→17), perform
• Clock settings will be saved for approx. 3 months even after battery is removed,
provided a fully-charged battery was installed in camera for the 24 hours
beforehand.
●
Failure to set the date and time will cause the date/time to be improperly printed when
printing pictures in digital photo center or when using [TEXT STAMP].
●
Year can be set between 2000 and 2099.
●
After the time has been set, the date can be printed correctly even if the date is not
displayed on the camera screen.
Select either [24HRS] or [AM/
PM] for the time display format.
and .
VQT2M98
13