Panasonic DMCFH3 - DIGITAL STILL CAMERA Operating Instructions Manual page 25

u [VOLUME]
• When you connect the camera to a TV, the volume of the TV speakers does not change.
[LCD MODE]
LCD
• High Angle Mode is also canceled if you turn the camera off or [SLEEP MODE] is activated.
• The brightness of the pictures displayed on the LCD monitor is increased so some subjects
may appear different from real life on the LCD monitor. However, this does not affect the
recorded pictures.
• The LCD monitor automatically returns to normal brightness after 30 seconds when recording
in Power LCD Mode. Press any button to make the LCD monitor bright again.
• If the screen is difficult to see because of light shining on it, use your hand or another object to
block the light.
• The number of recordable pictures decreases in Auto Power LCD Mode, Power LCD Mode and
High Angle Mode.
• [AUTO POWER LCD] and [HIGH ANGLE] cannot be selected in Playback Mode.
[DISPLAY SIZE]
[FOCUS ICON]
Preparation
Adjust the volume of the speaker to any of 7 levels.
These menu settings make it easier to see the LCD monitor when
you are in bright places or when you are holding the camera high
above your head.
[OFF]
„ [AUTO POWER LCD]:
The brightness is adjusted automatically depending on how bright
it is around the camera.
... [POWER LCD]:
The LCD monitor becomes brighter and easier to see even when
taking pictures outdoors.
Å [HIGH ANGLE]:
The LCD monitor is easier to see when taking pictures with the
camera held high above your head.
Change the display size of some icons and menu screens.
[STANDARD]/[LARGE]
Change the focus icon.
[ ]/[ ]/[ ]/[
- 25 -
]/[ ]/[ ]