Replacing The Keyboard - Lenovo IdeaCentre B310 Hardware Replacement Manual

Lenovo ideacentre b3 series hardware replacement guide v1.1
Hide thumbs Also See for IdeaCentre B310:
Table of Contents

Advertisement

8. Connect the data and power cables back to the hard disk drive.
9. Align the 4 screw holes in the hard disk drive bay with the mounting holes in
the chassis, then screw it back.
10. Install the computer cover and stand.

Replacing the keyboard

Attention:
Do not remove the computer cover or attempt any repair before reading the
"Important safety information" in the Safety and Warranty Guide that was
included with your computer or in the Hardware Maintenance Manual (HMM)
for the computer. To obtain copies of the Safety and Warranty Guide or
HMM, go to the Support Web site at http://consumersupport.lenovo.com.
To replace the keyboard:
1. Remove any media (diskettes, CDs, or memory cards) from the drives,
shut down your operating system, and turn off all attached devices and the
computer.
2. Unplug all power cords from electrical outlets.
3. Locate the connector for the keyboard. Refer to "Left and right view" and "Rear
view".
Note: Your keyboard might be connected to the standard keyboard
connector
at the rear of the computer or to a USB connector
or rear of the computer.
1
4. Disconnect the failing keyboard cable from the computer and connect the new
keyboard cable to the same connector.
18
Hardware Replacement Guide
2
either side

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ideacentre b3 series

Table of Contents