User Password - Asus Q500A E-Manual

Security
This menu allows you to set up the administrator and user password
of your Notebook PC. It also allows you to control access to your
Notebook PC's hard disk drive, input/output (I/O) interface, and USB
interface.
NOTE:
If you install a User Password, you will be prompted to input this
•
before entering your Notebook PC's operating system.
If you install an Administrator Password, you will be prompted
•
to input this before entering BIOS.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main Advance Boot
Password Description
If ONLY the Administrator's password is set,then this
only limits access to Setup and is only asked for when
entering Setup. If ONLY the user's password is set,
then this is a power on password and must be entered
to boot or enter Setup. In Setup, the User will have
Administrator rights.
Administrator Password Status
User Password Status
Administrator Password

User Password

HDD User Pwd Status :
Set Master Password
Set User Password
I/O Interface Security
System Mode state
Secure Boot state
Version 2.15.1226. Copyright (C) 2012 American Megatrends, Inc.
To set the password:
On the Security screen, select Administrator Password or
1.
User Password.
2. Type in a password then press
3. Re-type to confirm the password then press
Notebook PC E-Manual
Security Save & Exit
NOT INSTALLED
NOT INSTALLED
NOT INSTALLED
User
Enabled
Set Setup Administrator
Password.
→← : Select Screen
: Select Item
↑↓
Enter: Select
+/— : Change Opt.
F1 : General Help
F9 : Optimized Defaults
F10 : Save & Exit
ESC : Exit
.
.
29