Start Printing; Error Messages - Canon EOS 10D - Digital Camera SLR Manual

•
For the DPOF print type, [Both] cannot be selected. If [Both] is set, the
printing will be done according to the [Standard] setting.
•
The file No. cannot be imprinted.

Error Messages

If a problem occurs with the printing, an error message will appear on
the LCD monitor. Press <
problem, resume printing.
To resolve printing problems, refer to the printer's instruction manual.
Paper Error
Check whether the paper is properly loaded in the printer.
Ink Error
The printer has run out of ink or the waste ink tank is full.
Hardware Error
Check for any printer problems other than paper and ink problems.
Check the camera's battery level.
File Error
You attempted to print an image that cannot be printed with
PictBridge.
Images taken with a different camera or images edited with a
computer might not be printable.
6

Start printing.

•
Turn the <
press <
The printing will start.
s
•
When the printing ends, the screen will
return to step
> to stop the printing. After resolving the
DPOF Printing
> dial to select [OK], then
>.
3
.
11