Using The Remote Control; Adjust The Image - Epson BrightLink 436Wi Quick Setup

4
The default language of the menu system is English. To select another
language, press the Menu button on the remote control. Select
Extended and press . Select Language and press
language and press . Press the Menu button to exit the menu system.

Adjust the image

1
If you don't see an image, press the Source Search button on the
projector or the remote control to select the image source.
Note: If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
2
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
3
Press the Wide or Tele buttons on the projector to enlarge or reduce
the image.
4
Turn the focus ring to sharpen the image.
5
If your image looks like
projector to correct it.
6
If your image looks like
one side of the screen at an angle. Place it directly in front of the center
of the screen, facing the screen squarely. Or press the
on the projector to open the Keystone menu, and then press the Wide or
Tele buttons to correct the horizontal keystone.
. Select your
or , press the or buttons on the
or , you've placed the projector off to
or

Using the remote control

Make sure the batteries are installed as shown (two AA batteries).
Turn projector on
Access projector
Turn off projector
For more information on using the remote control, see the online User's
Guide.
Project wirelessly
Follow the steps here to connect the projector wirelessly over an 802.11b,
802.11g, or 802.11n wireless network. You must install the optional Epson
wireless LAN module (part number V12H418P12). Your computer must have
a wireless card or built-in wireless interface, and be running Windows 8,
Windows 7, Windows Vista
or Mac OS X 10.5.8 to 10.8.x.
1
Turn off the projector and unplug the power cord.
2
Remove the screw securing the wireless LAN module stopper, then
remove the stopper.
buttons
3
Insert the wireless LAN module into the port.
Choose which source
to display
and off
Switch between
computer and Easy
Interactive Pen
menus
Navigate projector
menus
display
Get solutions to
common problems
, Windows XP Professional x64, Windows XP,
®