Connecting A Digital Audio System - Toshiba 39L2300U User Manual

34
Connecting Your TV

Connecting a digital audio system

(Sample Illustration) 58L1350U—HDMI
receiver and playback device connections
To connect an HDMI
(type A connector) per HDMI
types" on page
Before controlling the device(s):
After completing the above connections, configure the HDMI
v
CEC Setup menu with the desired settings, see
HDMITM CEC" on page 101
HDMI
The connected devices must also be configured. For details, see
v
the operation manual for each device.
This feature uses the CEC technology as regulated by the
v
HDMI
This feature is limited to models incorporating Toshiba's
v
HDMI
operations. Refer to the individual instruction manuals for
compatibility information.
Connecting a digital audio system
The TV's DIGITAL AUDIO OUT terminal outputs a Dolby
Digital or 2-channel down-mixed PCM (pulse-code modulation)
signal for use with an external Dolby
Audio Receiver
Playback device (HDMI
TM
CEC DVD Player, etc.)
device, you will need one HDMI
TM
23)
If several devices are connected, HDMI
v
may not operate properly.
For proper operation, it is recommended that you use an HDMI
v
cable with the HDMI
TM
standard.
TM
CEC. However, Toshiba is not liable for those
TM
This feature may not work properly depending on the devices that are
connected.
Side panel
Playback device (HDMI
CEC DVD Player, etc.)
CEC compatible audio
TM
device (see "Overview of cable
TM
Logo (
TM
Digital decoder or other
®
TM
cable
TM
CEC Control feature
TM
).
"Setting up
®
TM
TM