Tape Reader Input Setting - Brother BE-0901E-AC Instruction Manual

Tape reader input setting

The followings describe how to input data from the tape reader.
■ Compatible data formats for the reading are: Tajima, Barudan and ZSK.
■ The data transfer rates of the tape reader and the embroidery machine have to be synchronized each
other before sewing.
■ The stored data in the memory is titled as "TapeData".
1. Set the device to read from to
Refer to "Automatic input setting" (→ page E-1) for the setting procedure.
2. Press four times.
A message will be shown followed by the tape data selection screen.
3. Choose the type of the tape data with
4. Arrange the tape reader to standby.
5. Press .
The data will be read now.
E-4
memory.
↓
keys.