Elation Design Spot 250 Pro User Manual page 23

Manual Control
Calibrate Values
User Mode
Edit User Mode A
Edit User Mode B
Edit User Mode C
Select Programs
Edit Program
Edit Scenes
Rec. Controller
8.1 Function Mode:
8.1.1 "Set DMX Address" - DMX address setting – This function is used to set or
adjust the fixture's starting DMX address. Every device controlled by DMX has to have a
unique starting address. The addressing feature is what allows DMX to function
properly. The DMX address of a fixture is what allows it to communicate with a controller
properly. The DMX addressing also allows the fixture to ignore any DMX information
coming from the controller that is not meant specifically the fixture. Because each fixture
is connected in a daisy-chain fashion it is imperative to assign a proper and unique
starting DMX address to each and every fixture. The DMX address is non-destructive
and will remain in the fixture's memory even when the power to the unit is switched off.
Memory is backed-up and retain by an internal power source that should last about five
years. For proper DMX addressing see Section 10/Page 33 of this user manual.
©Elation Professional®
PAN PAN =XXX
: :
--Password-- Password=XXX
Color wheel Color wheel=XXX
: :
XXXXXX (Band)
User Mode A
User Mode B
User Mode C
PAN PAN = CH01
: :
Auto Pro Part 1 Program 1 ~ 10 Program 1
Auto Pro Part 2 Program 1 ~ 10 Program 2
Auto Pro Part 3 Program 1 ~ 10 Program 3
Program 1 Program
: Test
Program 10 Step
01=SCxxx
Step
64=SCxxx
Edit Scene 001 Pan, Tilt,...
~ Edit Scene --Scene
250 Time--
Input
Outside
XX~XX
("STEP
XX")
Pan=xxx
TIME=xx.xs
By
23
Design Spot 250 Pro™
Fine adjustment of the lamp
Calibrate and adjust the
effects to standard/right
position. Password "050"
User's mode to change
channel numbers
Preset User modes
Select programs to be run
Testing program
Program in loop
Save and exit
Save and automatically
return
Manual scenes edit
Automatic scenes rec
Design Spot 250 Pro™