For Technical Assistance Please Call Toll Free 1-877-4BROTHER Email: tsupport@brother.com Website: http://www.brother-usa.com/industembroidery/tech_down.aspx Perform all maintenance with the machine OFF Daily Maintenance Cleaning Oiling Rotary hook Rotary hook 1. Open bobbin case covers and remove bobbin 1. Rotate the pulley or degree wheel backwards so cases.
For Technical Assistance Please Call Toll Free 1-877-4BROTHER Email: tsupport@brother.com Website: http://www.brother-usa.com/industembroidery/tech_down.aspx Weekly Maintenance Oiling Needle Bars Oil Tanks 1. Remove the front plate that has the “BROTHER” 1. Fill both oil tanks with fresh oil to ½ full by inserting logo on it by removing one screw and loosening oil bottle through the rubber dust plugs.
For Technical Assistance Please Call Toll Free 1-877-4BROTHER Email: tsupport@brother.com Website: http://www.brother-usa.com/industembroidery/tech_down.aspx Monthly Maintenance Cleaning Knives Control Box 1. Remove the two screws and remove the needle 1. Use a brush to clean fan filter on control box. plate. 2. Clean any thread and lint around the moving and fixed knive with a brush or compressed air 3.
For Technical Assistance Please Call Toll Free 1-877-4BROTHER Email: tsupport@brother.com Website: http://www.brother-usa.com/industembroidery/tech_down.aspx 6 Month Maintenance Greasing Color Change Assembly Color Change Linear Rail 1. Color change the machine to the furthest needle 1. Color change the machine to needle 1. Apply white to the left.
Page 5
For Technical Assistance Please Call Toll Free 1-877-4BROTHER Email: tsupport@brother.com Website: http://www.brother-usa.com/industembroidery/tech_down.aspx 6 Month Maintenance Greasing X Linear Rail Y Linear Rails 1. Looking up underneath the pantograph you will 1. Push the pantograph slowly to the back. Apply see the X linear rail. white grease (30) to the two grooves of the linear rails on boththe left and right side of the machine.
Page 6
For Technical Assistance Please Call Toll Free 1-877-4BROTHER Email: tsupport@brother.com Website: http://www.brother-usa.com/industembroidery/tech_down.aspx 6 Month Maintenance Greasing Presser Foot Assembly 1. Color change the machine to needle number 1. Apply black grease (BR2) to the grooves of the presser foot guide plate for the guide bracket and retracting lever as indicated by the arrows.