Windows Vista - Network Connection - Kyocera FS-C5100DN User Manual

Windows Vista - Network Connection

1
2
3
4
5
6
7
8
9
10
User Guide
• Select Print a test page to verify a connection with the printer and create a print
out of the installed driver components.
When the installation completes successfully, click Finish to exit the Printer
Installation Wizard and return to the CD-ROM main menu.
For software installation failures, a message box appears, One or more software
installations have failed. See the details below. Click Finish and retry the installation.
If the same message appears again, contact your system administrator.
The installation of the printer is now complete. If prompted, restart your system.
Windows Vista - Network Connection
Ensure that the printing system is powered on and connected to the network. On the
Installation Method page, select Custom Installation. Click Next.
On the Custom Installation page, ensure that the KX Driver is selected as the
product. To install fonts or utilities, click the Utility tab, and select from the options
there. When you are finished selecting items for installation, click Next.
The Discover Printing System page appears.
To find a printing system already turned on and connected to the network, click
Discover, select the printing system, and go to
If Discovery does not find your printing system, a message box appears. Ensure that
your printer is properly connected by the network cable and that it is powered on, and
then close the message box and retry Discovery. You also have the choice to
manually select your printing system and port by selecting Custom select, and then
clicking Next.
The Printer Port page appears. If the port you want to use appears in the Port name
list, select it and click Next, then go to
To create a new port, click Add Port, and then click Next. The Add Port Wizard
page appears.
Type the printer name or IP address, and then click Next. The wizard automatically
attempts to detect the TCP/IP port. If it cannot detect the port, the Additional Port
Information Required page appears. Click Back to correct the IP address, or, if you
are sure the address is correct, select an Address Type. Click Next.
After the port has been created, the Completing the Add Standard TCP/IP Printer
Port Wizard page appears. Click Finish to close the Add Port Wizard page.
The installation wizard Printing System page appears. From the list, select the
Printing System to install, and click Next.
In Printer Settings, you can assign a name to the printing system. This is the name
that appears in Windows Printers and Faxes and in the printer list in applications.
You can also choose to share this printer with others or set this printer as the default
printer. Make your selections, and then click Next.
On the Confirm Settings page, click Install if the settings are correct. Click the back
arrow to correct the settings.
The Installation Completed page appears showing the installation details.
step 8.
step 7.
Installation
1
2
3
4
5
6
7
8
9
1-6