Table of Contents
Advertisement
Power Spot 700 II™
6. MOUNTING AND INSTALLATION
Cautions:
For added protection mount the fixtures in areas outside walking paths, seating areas, or in
areas were unauthorized personnel might reach the fixture.
Before mounting the fixture to any surface, make sure that the installation area can hold a
minimum point load of 10 times the device's weight.
Fixture installation must always be secured with a secondary safety attachment, such as
an appropriate safety cable.
Mounting
The POWER SPOT 700 II™ is fully operational in two different mounting positions,
hanging upside or set on a flat level surface. To avoid internal damage to the unit, never
mount the unit on its side as illustrated below. Be sure this fixture is kept at least 1.5 feet
away from any flammable materials (decoration etc.). Install a safety cable that can hold at
least 10 times the weight of the fixture. Never use the carrying handles for secondary
attachment.
16
©Elation Professionals® Los Angeles, Ca.
-
wwww.ElationLighting.com
-
Page
Advertisement
Table of Contents
