Asus MEW-RM User Manual page 20

3. HARDWARE SETUP
5) PCI 3 Volt Setting (PCI3VSEL)
This jumper allows you to select the voltage supplied to PCI devices. If you
have PCI devices that require auxiliary power, set this jumper to Enable 3 VSB.
Setting
Enable 3VSB [1-2] (default)
Disable 3VSB [2-3]
MEW-RM
®
MEW-RM PCI 3 Volt Selection
6) Safe Mode Setting (SAFE_MD)
Usually socket 370 processors have locked frequency multiples. In this case,
there is no way to exceed the specified multiple whether through motherboard
settings or BIOS setup. With unlocked socket 370 processors, exceeding the
specified multiple is possible through BIOS setup. Exceeding the specified mul-
tiple may result in hanging during bootup. If this occurs, enable Safe Mode to
force a multiple of 2 in order to enter BIOS setup to correct the problem.
Setting
Normal
Safe Mode
MEW-RM
®
MEW-RM Safe Mode Setting
20
PCI3VSEL
SAFE_MD
[1-2] (default)
[2-3]
ASUS MEW-RM User's Manual
PCI3VSBSEL
1 2 3 1 2 3
Enable 3 VSB Disable 3 VSB
SAFE_MD
3
3
2 2
1 1
Normal Safe Mode
(Default)