Samsung My Shot SCH-r430 series User Manual page 85

Press the OK soft key or
2.
digit sequence and "Please say" plays through the speaker
followed by the four digits appearing in the display.
Wait for the beep and say the digits using your normal tone
3.
of voice. After a moment, the phone plays back the
recording and prompts "Did the recording sound ok?"
• If the recording was good, say "Yes."
• If you need to re-record, say "No."
If you say "No," the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.
Repeat this step until you're satisfied with the recording.
After confirming that the recording sounds "ok", continue
4.
the recording process with the next set of digits.
After 10 sets of digits, the phone asks whether you want to
5.
do more adaptation. Answer "Yes."
6. Repeat steps 4 and 5 for another 10 sets of digits. After the
second group of 10 sets of digits, "Adaptation complete"
plays through the speaker and you are returned to the Digit
Dialing menu.
. Your phone displays the first Reset Digits
To reset digit dialing to factory default settings, do the following:
From the Tools menu, select Voice Service
1.
➔ ➔
Digit Dialing Reset Digits. The phone prompts you to
confirm digit reset.
Press the OK soft key or
2.
or press the Back soft key or
Sound
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
From the Tools menu, select Voice Service
1.
➔
Sound. The following options appear in the display:
• Prompts — On/Off — Enables or disables audio prompts.
• Digits — On/Off — Enables or disables digit playback.
• Names — On/Off — Enables or disables name playback.
• Name Settings — Lets you adjust the Speed (Faster or Slower)
and Volume (Louder or Softer) of your phone's audio name
playback.
Highlight the desired option, then press
2.
Highlight the desired setting.
3.
➔
Voice Settings
to reset your digit adaptation,
to cancel.
➔
Voice Settings
.
Tools 82