Table of Contents
Advertisement
Notebook Manager
The computer has a built-in system setup program called Notebook Manager.
The Windows-based Notebook Manager allows you to set passwords, the
start-up sequence of the drives, and power management settings. It also
shows current hardware configurations.
Note: Certain hot key functions are disabled when you access the
notebook manager, because these functions are also found in the
notebook manager.
To start the Notebook Manager, press Fn-F2 or follow these steps:
1. Click on Start, Programs, then Notebook Manager.
2. Select the Notebook Manager application to run the program.
Note: Changes made to most settings in the Notebook Manager take
effect the next time the computer restarts. However changes
made in the Power Management, Display Device or Line-in/
Microphone screens will take effect immediately.
Notebook Manager consists of six sections:
6
Information Viewer
6
Boot Sequence
6
Password
6
Power Management
6
Display Device
6
Line-in/Microphone
To select a section, click on the tab of the section you want to view.
Chapter 2
33
Advertisement
Table of Contents
