3. HARDWARE SETUP
3.8.3 Riser Card Connectors
1) LAN Activity Connectors
These connectors support Local Area Network (LAN) cards such as the ASUS
PCI-L101 (see 7.1 ASUS PCI-L101 Fast Ethernet Card) with output signals
for data transfer activity. The LAN_LED connector allows the front panel LED
to flash during transfer activity between the network and the computer. The
WOL_CON connector allows the system to power up when there is a wakeup
package (signal) received from the network.
IMPORTANT:
This feature requires that Wake On LAN is set to Enabled (see
4.5.1 Power Up Control) and that your system has an NLX power supply with at
least 720mA +5V standby power.
NLX-R
®
®
B9-N
YEONG-YANG
LAN Activity Connectors
2) Front Panel Microphone Connector
This connector is used to connect the front panel microphone jack to the moth-
erboard through a ribbon cable.
NLX-R
®
®
B9-N
YEONG-YANG
Front Panel Microphone Jack
NLX-R (Front)
LAN_LED
(NLX-R only)
B9-N (Front)
Yeong-Yang (Front)
NLX-R (Front)
B9-N (Front)
Yeong-Yang (Front)
ASUS MES-N User's Manual
+5 Volt Standby
Ground
+
PME
WOL_CON
NLX-R & Yeong-Yang Risers
PME
Ground
+5 Volt Standby
B9-N Riser
The front panel's 1/8" microphone
jack connects to the riser card
through a ribbon cable
35