Gamma
Saturation
Hue
Gain
C-Booster
Reset
Allow the LCD monitor to stabilize for at least 20 minutes before making image adjustments. (Allow
the monitor to warm up for at least 20 minutes before making adjustments.)
Performing the <Reset> of the <Color> menu returns the color settings of the selected mode to the
default settings.
The values shown in percentages represent the current level within the specific adjustment. They are
available only as a reference tool. (To create a uniform white or black screen, the percentages for each
will probably not be the same.)
Adjustment Contents
Menu
To set the brightness of the screen
Brightness
When <BrightRegulator> is set "Enable", brightness of the screen automatically adjusted
depending on the surrounding brightness based on the manual brightness adjustment.
Directly pressing the up and down control buttons also can adjust the brightness.
To set the color temperature
Temperature
The values shown in the Kelvin are available only as a reference tool.
Setting the temperature under 4,000 K or over 10,000 K invalidates the color temperature
setting. (The color temperature's setting turns "OFF".)
To set the gamma value
Gamma
If setting the gamma value, the using the monitor in the digital signal input is recommended.
To change the saturation
Saturation
*
-
*
*
-
*
*
-
*
*
-
-
*
-
-
*
-
*
Function Descriptions
-
-
*
*
*
*
-
-
*
*
*
*
0 ~ 100 %
4,000 ~ 10,000 K
in 500 K increments (including 9,300 K) Default
setting is off (normal white)
1.8/2.0/2.2
-128 ~ 124
Setting the minimum level (-128) turns the image
to the monochrome.
Adjustable range