Lexmark Z52 Color Jetprinter User Manual page 40

Steps to basic printing
Beyond the basics
Maintaining your printer
Troubleshooting
Appendix
Index
Before proceeding, verify that:
• The parallel or USB cable is securely attached to both the printer
and the computer.
• The printer is plugged in and turned On.
• Your printer port is set to an LPT n port if you are using a parallel
cable or to a USB port if you are using a USB cable.
If you have a switch box or other device (such as a scanner or fax)
connected to the computer's parallel port, make sure it supports
bidirectional communication. You may need to disconnect your
printer from the switch box or other device and connect it directly to
your computer.
Printer is plugged in but doesn't print, or you get a Printer
Offline or Printer Not Ready message
Make sure:
• The printer is turned On.
• Paper is loaded correctly
• The parallel or USB cable is completely plugged into the printer
40
Troubleshooting
.
.