Images; Remote Live View Window Functions; Downloading; Focusing Manually - Canon EOS Rebel T3 18-55mm IS II Kit Instruction Manual

You cannot operate the camera when the [Remote Live View
window] is displayed. Pressing the Live View shooting button (the
camera's <SET> button on the
1D Mk IV 1Ds Mk III 1D Mk III
40D REBELXSi 450D REBELXS 1000D
Live View image on the camera's LCD monitor, allowing you to
view the image while operating the camera.
On
1D Mk IV 1Ds Mk III 1D Mk III 40D
, when the cursor is on the capture window's
REBELXS 1000D
button, you can operate the camera's Mode dial to change
the shooting mode.
You can shoot by operating the capture window, even if the
[Remote Live View window] is not displayed.
To perform exposure simulation (p.36)
window] or enable display of histograms (p.80), set your camera's
Custom Function [Live View exposure simulation] to [Enable]. On
1D Mk IV 5D Mk II 7D 60D
simulation] in the menu to [Enable].
On
1D Mk IV 5D Mk II 7D 60D
, you can also use mirror lockup with remote
REBELT2i 550D
shooting (you cannot take test shots after setting mirror lockup).
On , you can also use silent single shooting.
1D Mk IV
With , mirror lockup and silent single shooting
1Ds Mk III 1D Mk III
cannot be performed in remote shooting.
The [Test Shooting] window appears when you click the [Test
shooting] button.
During flash shooting, you can take a test shot under the same
conditions as an actual shot, and adjust the white balance based
on the shot test image (p.37).
You can save shot images to both your computer and a memory
card by checkmarking [Save also on the camera's memory card]
in preferences ([Remote Shooting] window) (p.64).
) will also display the
REBELXSi 450D
with [Remote Live View
, set [Exposure
50D
50D REBELT3i 600D
You can change the software that starts up automatically when
remotely shot images are transferred to your computer from DPP
to ImageBrowser or other software in preferences ([Linked
Software] window) (p.64).
For a list of the [Remote Live View window] functions, refer to
p.80.
For a list of the [Zoom View] Window functions, refer to p.81.

Remote Live View Window Functions

These pages explain the functions available in the [Remote Live View
window], including checking the camera settings and focusing while
viewing your subject on the computer screen.

Focusing Manually

You can focus manually while viewing the enlarged image in the
[Remote Live View window].
1 Set the lens's focus mode switch to < AF >.
2 Drag [ ] to the section you want to enlarge.
Introduction
Contents at
a Glance
1

Downloading

Images

2
Camera
Settings
3
Remote
Shooting
4
Preferences
Reference
Index
Drag
32 32