Enlarge and View an Image in the Edit Window
The edit window appears.
Edit window
It may take time for the image to redraw itself.
Click the [ ] in the upper left of the edit window to close the edit
window.
By selecting the [View] menu [AF Point] in the edit window, you can
display the AF points selected in the camera at the time of shooting.
However, AF points are not displayed for images whose image size
has been changed and then been converted and saved
images for which you selected an effect other than [Shot settings] as
correction of fisheye lens distortion aberration, or images which have
had settings specified during RAW processing on the camera for
distortion correction and chromatic aberration correction.
For a list of edit window functions, refer to p.115.
Enlarging and Viewing a Specific Area
Double-click
Tool palette
(p.42,
p.121),
Select the [View] menu
Double-click the area you want to enlarge.
The area you double-clicked is enlarged to 100% (actual pixel
size). If you wait for a while, it changes to a clearer display.
Double-click again to revert to the full view.
To change the display position, drag on the image or drag the
enlargement display position of the tool palette.
Tool palette enlargement display position
To display an image in an enlargement ratio other than 100%
[200% view] or [50% view].
You can change the enlargement ratio when you double-click (p.80).
Introduction
Contents at
Double-click
Operation
Advanced
Operation
Advanced
Image Editing
and Printing
Processing
Large Numbers
of Images
JPEG/TIFF
Change the enlargement
Reference
display position by
dragging
a Glance
1
Basic
2
3
4
Editing
5
Images
Index
11