Bluetooth Connection - ViewSonic VSD220 User Manual

Using Your VSD220 Smart Display
How to begin
1
A type A (HDMI) to type D (micro HDMI) HDMI cable must be available.
2
Connect the Type A connector of the HDMI cable to the desired HDMI-
compliant device.
3
Connect the Type D connector of the HDMI cable to the micro HDMI
port located on the back of your VSD220.
4
For PC or notebook connection, always set the appropriate resolution.
VSD220 supports with max. resolution of 1920*1080.
5
To enable the touch screen function, connect the micro USB cable to
micro USB connector of VSD220 and connect the other end to your
PC or notebook.
NOTE
• The touch screen function will work with computers running Windows 7 or later versions
without the need for additional drivers.

4.6 Bluetooth Connection

Bluetooth is a short-range wireless communi-
cations technology that allows your device to
connect to other Bluetooth-enabled devices
over a wireless network. Bluetooth on your
device operates in three different modes:
Status
On
Discoverable
Off
Descriptions
Bluetooth is turned on. Your device is enabled to detect
Bluetooth devices within range, but will not be found by
them.
Bluetooth is turned on, and other Bluetooth devices can
detect your device.
Bluetooth is turned off. Your device cannot send and
receive data using Bluetooth.
22