Advertisement
Quick Links
GLOCKENSPIEL STAND
YGS100/YGS70
OWNER'S MANUAL
Thank you for purchasing a YAMAHA
Glockenspiel Stand. Before using this
stand we urge you to read this Owner's
Manual thoroughly, and keep it in a safe
place for later reference.
Make sure to read the PRECAUTIONS on page 3.
Advertisement
Related Manuals for Yamaha YGS-100
Summary of Contents for Yamaha YGS-100
- Page 1 GLOCKENSPIEL STAND YGS100/YGS70 OWNER’S MANUAL Thank you for purchasing a YAMAHA Glockenspiel Stand. Before using this stand we urge you to read this Owner’s Manual thoroughly, and keep it in a safe place for later reference. Make sure to read the PRECAUTIONS on page 3.
- Page 3 Before using your Glockenspiel Stand, care- fully read and follow the precautions below. ■ Tighten All Bolts Firmly. (YGS100) Make sure that the YGS100A’s slide leg fixing bolts or lower crossbar fixing bolts are firmly tightened once the stand is set at the desired height. Bolts left loose may cause the stand’s height to shift during performance and can also cause noise and other problems.
- Page 4 (100mm diam- eter). The stand allows easy transport of the glockenspiel across flat surfaces and the tabletop is large enough to support any of the Yamaha glockenspiels, including older model types such as the YG1000/250C/50C or the Deagan Orchestra Bells 1590.
- Page 5 836 x 536 x 38 mm TABLE Inner Dimensions (W x D x H) 810 x 510 mm Height w/Legs 735~855 mm (7steps) Instrument Compatibility All YAMAHA Glockenspiels and the YX300 Height (Width) 687(646)mm / 740(585)mm / 785(520)mm / 825(452)mm / 858(381)mm Instrument Compatibility...
- Page 6 For safety reasons, assembly should be per- formed by at least two persons. Place the Glockenspiel stand (stand) table, on the floor with its underside facing up. Insert the slide legs into the four threaded holes on the leg fixing plates located on the underside of the table, and secure.
- Page 7 Connect the slide legs with the legs. Align the legs from above so that the slide legs will slide into the corresponding leg holes. Slide the legs together and adjust to the desired height. Securely tighten the slide leg wing bolt on each leg. Wing Bolt Wing Bolt Align notch with...