Intervideo Windvd - Compaq Presario 8000 Setup Manual

Speaker Setup in

InterVideo WinDVD

1 Insert a DVD movie into the
DVD-ROM drive. If the DVD
starts playing automatically, skip
to step 4.
2 Click Start on the taskbar.
3 Choose All Programs,
InterVideo WinDVD 4,
and then click InterVideo
WinDVD 4.
4 Right-click in the video window,
and then click Setup.
5 Select the Audio tab.
6 Under Audio Speaker
Configuration, select either
4 channel (Front L/R and
Surround L/R) or 6 channel
(5.1 Home Theater) if you
have analog speakers.
For digital speakers, under
Audio Output Configuration
select Digital (S/PDIF) out to
External Processor.
Note:
If your system does not include
a subwoofer, selecting the
Send 0.1 (LFE subwoofer) to
speaker/headphones box
may enhance the low
frequency range of sound.
7 Click Apply, and then
click OK.
Now sound can be heard properly
from all available speakers.
Speaker Setup After
System Recovery
Refer to the section "System
Recovery" of the printed
documentation included with your
PC. After a system recovery, you
must reselect your speaker mode in
the Sound Blaster Live! or the
Sound Blaster Audigy program
and in the InterVideo WinDVD
program.
Keep this information with your
printed documentation for future
reference.