Yamaha NU1 Owner's Manual page 22

Recording Your Performance
5
Press [RECORD] to engage the Record mode.
The [RECORD] lamp lights up, and the [PLAY/STOP] lamp flashes according to
the current tempo.
To exit from the Record mode, press [RECORD] again.
6
Start recording.
 With MIDI Recording:
Play a note on the keyboard or press [PLAY/STOP] to start recording. While
recording, the current measure number is shown on the display.
 With Audio Recording:
Press [PLAY/STOP] to start recording. While recording, the elapsed time is
shown on the display.
7
Press [RECORD] or [PLAY/STOP] to stop recording.
Dashes appear on the display in succession, indicating that the recorded data is
being saved. After the data is saved, an "
onds followed by the Song number, indicating that the Record mode is disen-
gaged.
NOTICE
While dashes appear in the display in succession, never turn off the power or disconnect
the USB flash memory. Doing so may delete all Song data in the instrument, including
external Songs (page 18).
8
Press [PLAY/STOP] to hear the recorded Song.
To stop playback, press [PLAY/STOP] again.
Deleting a Song file
If you want to delete the recorded Song, refer to page 25.
22 NU1
Owner's Manual
Lights up
1.
Measure number
0. 0 1. 0. 0 2.
Elapsed time
Indicates minutes. In Indicates seconds.
case of 10 minutes
or more, only the
lowest digit is
shown.
End
" message appears for three sec-
Flashes
2.
If memory space is running low:
An " EnP " message will appear in the dis-
play after pressing [RECORD]. You can
start recording, but the memory may
become full during recording. We recom-
mend that you first remove any unneces-
sary files (page 25) to ensure sufficient
memory capacity.
NOTE
With audio recording, the sound input from
the AUX IN jack is also recorded.