Changing Channels - Samsung HLR5656W - 56" Rear Projection TV Owner's Instructions Manual

Changing Channels

Using the Channel Buttons
Press the CH or CH
When you press the CH
You will see all the channels that the TV has memorized.
(The TV must have memorized at least three channels.)
You will not see channels that were either erased or not memorized.
Using the Number Buttons
Use the number buttons to quickly switch to any channel.
Press the number buttons to go directly to a channel. For example, to select channel 27, press
"2," then "7." The TV will change channels when you press the second number.
Using the "-" Button
The "-" button is used to select stations that broadcast both a digital and analog signal.
NOTE
• HD indicates the TV is
receiving a Digital High
Definition signal.
SD indicates the TV is
receiving a Analog
standard definition
signal.
button to change channels.
or CH button, the TV changes channels in sequence.
For example, for channel 7-1
(digital), press "7", then "-",
then "1", and you will see as right.
For channel 7-2 (analog), press
"7", then "-", then "2", and you
will see as right.
Using the Previous Channel
Press the PRE-CH button.
The TV changes to the last channel you were watching.
DTV Air
7-1
English
Picture Mode Standard
Sound Mode Standard
MTS English
Caption On
V-Chip Off
12:00 am
Air 7-2
Mono
Picture Mode Standard
Sound Mode Standard
MTS Stereo
Caption On
V-Chip Off
12:00 am
English - 31