Devices Menu - Yamaha mLAN Installation Manual

Devices Menu

4
After selecting [Device] menu, select the desired mLAN device then [Properties].
The following dialog appears, letting you set the amount of audio channels for the mLAN device. Depending on your mLAN
device, the special menu (like "Enable Monitoring Channels" below) may be indicated in the dialog.
When using the Yamaha 01X, for example, the parameters on the dialog box work as follows:
• Input Channels (Mac → 01X)
Determines the amount of audio channels transmitted from the computer to the 01X.
• Enable Monitoring Channels
Determines whether or not the audio signal is transmitted to the mLAN stereo/monitor channel of the 01X.
• Output Channels (Mac ← 01X)
Determines the amount of audio channels transmitted from the 01X to the computer.
When setting the Input Channels to "8 Channels" and setting the Enable Monitoring Channels to "On" with the 01X, Channels 1 –
8 of audio signals from the computer will be connected to the mLAN Input channels 1 – 8 (Input 9 – 16) of the 01X and channels
9 and 10 of audio signals from the computer will be connected to the mLAN Stereo In (Monitor In) of the 01X.
5
Select "Connect to Mac" from the Devices menu.
Connection (virtually) between the selected mLAN device and the computer is completed, letting you transfer audio signals
and MIDI messages between them.
Also, once the above instructions are completed, the mLAN Driver is made active on the Core Audio/Core MIDI system of the
computer.
mLAN Driver / mLAN Tools for Mac OS X Installation Guide
9