Technical Specifications - NETGEAR WNR3500Lv1 Setup Manual

To restore the factory default configuration settings:
Use a sharp object such as a pen or a paper clip to press and hold the restore factory settings
1.
button, located on the rear panel of the router, for about 7 seconds, until the Power light begins
to blink (see "Back Panel" on page
2. Release the restore factory settings button, and wait for the router to restart, and for the Power
light to stop blinking and become solid amber.
The factory default settings will be restored so that you can access the router from your Web
browser using the factory defaults.

Technical Specifications

Network Protocol and Standards Compatibility
Data and Routing Protocols
Power Adapter
North America
UK, Australia
Europe
Japan
All regions (output)
Physical
Dimensions
Weight
Environmental
Operating temperature
Operating humidity
Electromagnetic Emissions
Designed to conform to the following
standards
Technical Specifications
5).
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP,
Bigpond, Dynamic DNS, and UPnP
120V, 60 Hz, input
240V, 50 Hz, input
230V, 50 Hz, input
100V, 50/60 Hz, input
12V DC @ 1.0A, output
6.9" x 5.1" x 1.4" (175.5 x 130 x 35 mm)
0.7 lb. (0.34 kg)
0 to 40 C (32º to 104º F)
90% maximum relative humidity, noncondensing
FCC Part 15 Class B
EN 301489-1/17 Class B, EN300328
EN 60950 (CE LVD)
41