Setting The Time - NETGEAR WNR2200 - N300 Wireless Router User Manual

Select Logs under Content Filtering in the main menu. The Logs screen displays.
Figure 3-8
Table 3-1. Log Entry Descriptions
Field
Date and time
Source IP
Target address
Action
To refresh the log screen, click the Refresh button.
To clear the log entries, click the Clear Log button.
To e-mail the log immediately, click the Send Log button.

Setting the Time

The WNR2200 router uses the Network Time Protocol (NTP) to obtain the current time and date
from one of several network time servers on the Internet. To localize the time for your log entries,
you must specify your time zone:
Protecting Your Network
N300 Wireless Router with USB WNR2200 User Manual
Description
The date and time the log entry was recorded.
The IP address of the initiating device for this log entry.
The name or IP address of the website or newsgroup
visited or to which access was attempted.
Whether the access was blocked or allowed.
v1.0, September 2010
3-11