Advertisement
1. Power-off memory functions:
This machine has a power-off memory function. In case of abrupt power failure or the power
failure or the power must be cut off during a program cycle, the present settings will be
saved, and operation will resume when the power is switched on again.
2 The memory function saves the selected programs in previous wash cycle. For
the first time use, the temperature and speed memory values are the recommended
values;Memory function saves the frequently used washing course, which make the
washing as easy as possible; Press the start/pause button to start the program.
(Memory function disables while time delay or soak or both programs are selected)
3. Children lock function:
After a program is started, lock can be enabled by pressing the "delay" button the
"Start/pause"button at the same time for 3 seconds. The program can no longer be changed
by pressing the options button or turning the program selector, and at the same time the
washing machine emits an audible signal as a reminder that the buttons are locked. To unlock
the button lock function, press the "delay" and "start/pause" buttons again for 3 seconds.
4. To cancel a program or select a new program and options during the wash cycls(with the
button lock disabled.)
a) Press the "Start/pause" button, then switch off power and the program is automatically
canceled. Turn the program selector again to choose another program.
b) If you wish to select an option during the wash cycle,press the "Start/pause" button, then
select the desired option and press the "Start/pause" button again.
5.After the end of washing cycle, the washer plays short passage music signals
except the night wash program, which informs the end of washing cycle. The door
can be opened to take washing out.
6.Unbalance protection: In spinning process, if the clothes are placed unbalanced,
the washer makes the correction. However, if the correction is not completed in set
time, the washer stops spinning to avoid possible violent vibration. In this case,
check the clothes whether knotted or entangled together or not. Start the spin
program after the clothes are rearranged. While there are small clothes, the washer
will not run the spin program due to the unbalance protection. Run the washer after
adding more clothes into the tub. In addition, the unbalance correction process will
take some time, which is normal phenomenon.
7. Mute: select "self-clean" program, press and hold "delay+prewash"buttons for 3
seconds at the same time to cancel all the buzzer signals (except warning sound),
and the display indicates bEEP OFF; Activate the sound of buzzers by simultaneously
pressing and holding "delay and prewash" buttons for 3 seconds again.
8. Sensor clean
1) The sensor clean function disables while in "memory,self-clean, quick wash"
programs.
2) The sensor clean function disables when the time of washing plus heating
program is less than 20 mintues.
3) The sensor clean function disables when the washing time or spin times
are changed.
4) The sensor clean function disables once "strong wash,prewash,soak" is selected.
12
13
Advertisement
