Table of Contents
Advertisement
Level
DRY
LEVEL
• Use this button to set dry level
• First, select sensor dry cycle.
• Select dry level to adjust how much you want to dry the load. As the cycle runs, the control senses
the dryness of the load and adjusts the time automatically
based on the selected dryness
level.
DRY LEVEL selections can only be made while
using Sensor Dry Cycles. Selecting
MORE Dry or LESS Dry automatically adjusts the
needed time which is already sensed.
Start/ PauseButton
• Use this button for start or pause.
Starting your dryer
1. Before use
• Clean lint screen before or after each cycle.
• Place laund U into dryer guadshut dool: See Loading.
• Tuna the Daob to select the drying cycle you wguat.
The preset setting for Sensor DU Cycles or Manual
Cycles will glow. The estimated or actual cycle time (in
minutes) will show in the display.
O
•
a
*
F ilowing
are sample
loads for Super Capacity
Dryers:
Heavy Work Clothes
4 jeans
2 sweatpants
4 workpants
2 sweatshirts
4 work shirts
Cotton/Towels
10 bath towels
10 hand towels
14 wash cloths
Mixed Load
3 sheets (1 king, 2 twin)
9 T-shirts
4 pillowcases
9 shorts
3 shirts
10 handkerchiefs
3 blouses
2. Loadinq
• Determine load size by the amount of space the load
requires rather than the weight of the load.
• Avoid overloading the duel:
Following these instructions cma help reduce your utility
bill, prolong the life of your clothes, and decrease the
likelihood of uneven duing mad wrinkle.
3. To use a sensor dry cycle
• Select DRY LEVEL
to adjust how dry you want
the load. As the cycle runs, the control senses the
dryness of the load and adjusts the time
automatically
for the selected dryness
level.
• Select the desired Options.
• Press START'PAUSE
DRY LEVEL selections can only be made while
using Sensor Dry Cycles. Selecting MORE Dry or
LESS Dry automatically adjusts the sensed time
needed.
29
Advertisement
Table of Contents
