Table of Contents
Advertisement
1
Preparations
Icons
AUTO
Key Guide
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Adjust the screen brightness.
Confirm a menu selection.
Pressing the [
] button when the OSD menu is not displayed will
change the input source (Analog/DVI). If you power on the product or
change the input source by pressing the [
shows the changed input source will appear at the top left corner of the
screen.
This function is not available for products with an
only.
Press the [
] button to automatically adjust the screen settings.
AUTO
Changing the resolution in Display Properties will activate the
Auto Adjustment
This function is only available in
Turn the screen on or off.
When a control button on the product is pressed, the Key Guide will be
displayed before the onscreen menu opens. (The guide shows the
function of the button pressed.)
To access the onscreen menu when the guide is displayed, press the
corresponding button again.
The Key Guide may vary depending on the function or product model.
Refer to the actual product.
Description
] button, a message that
Analog
function.
Analog
mode.
1 Preparations
interface
20
Advertisement
Table of Contents
