Samsung GS17VSSB Service Manual page 12

3 Disassembly and Reassembly
3-2 GS15MS/GS17MS/GS19MS
3-2
6. Remove 7 screws, 2 hexa screws from the
boards and lift up the boards.
Caution : When repairing panel only,
!
disconnect just LVDS cable, Panel-Lamp /
Wire marked in circle in the picture without
removing the screws on board in order to lift
the board up.
7. This picture is panel.
1. Place monitor face down on cushioned table.
Remove 4 screws from grip on the stand and
remove the stand. Remove 2 screws from the
rear cover.
2. Insert the opening jig into the grooves at a
hole and press until it clicks and lift up the
rear cover.
3. Remove 3 screws from the shield and
disconnect function cable, speaker cable from
the shield.
4. Lift up the panel shield and remove 4 screws
from the panel shield. (Right / Left)
GS17VS/GS17VT/GS19VS/GS19VT/
GS15MS/GS17MS/GS19MS