System Agent Configuration - Asus P8B75-V User Manual

3.5.4

System Agent Configuration

UEFI BIOS Utility - Advanced Mode
Main
Back Advanced\
System Agent Bridge Name
Memory Remap Feature
> Graphics Configuration
> NB PCIe Configuration
Memory Remap Feature [Enabled]
[Enabled]
[Disabled]
Graphics Configuration
Primary Display [Auto]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [Auto] [iGPU] [PCIE] [PCI]
iGPU Memory [64M]
Allows you to select the amount of system memory allocated to DVMT 5.0 used by
the iGPU. Configuration options: [32M] [64M] [96M] [128M] ~ [448M] [480M] [512M]
[1024M]
Render Standby [Enabled]
Allows you to enable the Intel Graphics Render Standby support to reduce the iGPU
power use when idle. Configuration options: [Disabled] [Enabled]
iGPU Multi-Monitor [Enabled]
Allows you to enable or disable the Lucid Virtu Universal MVP support for both the
integrated and discrete graphics. The iGPU shared memory size will be fixed at 64MB.
Configuration options: [Disabled] [Enabled]
NB PCIe Configuration
Allows you to configure the NB PCI Express settings.
PCIEX16_1 Link Speed [Auto]
Allows you to configure the PCIE x16_1 speed. Configuration options: [Auto] [Gen1]
[Gen2]
3-18
Ai Tweaker
Advanced
System Agent Configuration >
Allow you to enable remapping the memory above 4GB.
Disables this function.
Monitor Boot
Enable or disable memory remap above
SandyBridge
4G.
Enabled
Chapter 3: BIOS setup
Tool