Installation Options - Norcold DE-0251 Installation And Owner's Manual

Be sure the refrigerator is not in direct sunlight or near a gas stove, a heater, or other
heat-generating appliances. Avoid installing your refrigerator close to warm water lines
or warm air ducts.
Your refrigerator was thoroughly cleaned before shipment from the factory.
It is advisable, however, to clean the interior once more before using. Wipe the interior
with a cloth and warm water. Then wipe with a dry cloth.
Ventilation
Sufficient ventilation (airflow) over the rear mounted condenser of the refrigerator is
necessary for the refrigerator to operate correctly (See Art01582).
* NOTE: The fan will operate only when
the ambient temperature is
higher than approximately 95° F.
CAUTION:
bottom rails from the refrigerator
cabinet. The rails supply space
under the refrigerator that is neces-
sary for correct ventilation.
If you do not make sure that the
ventilation is correct, a shortened
refrigerator life expectancy, poor
refrigeration, continuous operation,
accelerated battery discharge and a
void warranty will result.

Installation Options

Install a decorative door panel
NOTE: The decorative door panel must be
4 mm or less in thickness.
1. Remove the door from the refrigerator
by removing the two (2) bolts that attach
the door hinge to the bottom of the
refrigerator (See Art01583).
Do not remove the
Air outlet
Air inlet
7
Fan*
Rails
Art01582