If You Want The Better Connection With Component - Sceptre X42BV-FullHD User Manual

If You Want the Better Connection with Component...

1. Make sure the power of X42 LCD HDTV and your DVD player is turned off.
2. Obtain a Component Cable. Connect the green color connector to both your DVD
player and Component 1's green connector port off the back of your X42 LCD
HDTV.
3. Connect the blue color connector to both your DVD player and Component 1's
blue connector port off the back of your X42 LCD HDTV.
4. Connect the red color connector to both your DVD player and Component 1's red
connector port off the back of your X42 LCD HDTV.
5. Obtain a RCA Audio Cable. Connect the white color connector to both your DVD
player and Component 1's white connector port off the back of your X42 LCD
HDTV to the right side of your green, blue, red component connection.
6. Connect the red color connector to both your DVD player and Component 1's red
connector port off the back of your X42 LCD HDTV to the right side of your green,
blue, red component connection.
7. Turn on the X42 LCD HDTV and your DVD player.
8. Use the remote control's source button or the source button on the right side of
the TV to switch to YPbPr 1.
Please Note :
•
•
•
If Component 1 is already occupied, please use Component 2 as your
connection port and switch to source YPbPr 2.
Please reference the DVD player's manual as well, to make sure the
DVD player is configured to output correctly to the TV.
This TV will turn off automatically if there's no signal present for more
than 15 minutes
www.SCEPTRE.com
SCEPTRE X42 HDTV User Manual
- 31 -